The Tow Ready Mounting Bracket 4-Pole Flat # 18144 is what you are looking for. It will hold the 4-Pole connector next to your trailer hitch receiver. All you will have to do is drill mounting holes into your hitch.
If you would rather not drill into your hitch you can install the mounting bracket on a No-Drill Bracket. You can use part # 18140 for the shorter one or part # C57202 for the longer one.
This will help to make the wiring harness and connector look much more clean.
I have... view full answer...
To tow with your 2018 Dodge Grand Caravan you need a trailer hitch, trailer wiring, and a ball mount kit. The trailer hitch that I recommend for your application is the etrailer.com # E98854. This features a 2" receiver and gives you the best ground clearance/bumper clearance which is beneficial if you end up using accessories like a bike rack or cargo carrier.
If you plan on towing a smaller trailer without brakes, then I recommend using the Curt # C56331 which gives you a 4-Way connector... view full answer...
According to Draw-Tite, their # 75119 Class III hitch is a fit for all models of the 2000 Dodge Grand Caravan, including the Sport model.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118334, a ball mount like
# 40346, a # PC3 hitch pin and a # 19260 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball.
I've linked to a product install video for the hitch. view full answer...
AC surge/spike suppressors vary in the level of protection they provide and in their connectivity options. Some will include a voltage regulator along with the spike suppressor. Using one along with a suitable charger is the best way to protect delicate electronic devices like computers and smartphones.
DC-source power charging is less risky since the battery power source is more stable than AC power. This device is ideal for charging phones and computers from your RV battery since it... view full answer...
The best way to install a 6-way connector on the rear of your 2015 Dodge Grand Caravan is to use # ETBC6. This uses your existing 4-way and provides a 6-way and all the necessary wiring to power your trailer's brakes. The only thing it doesn't include is an electric brake controller.
If you need a brake controller as well I suggest the Tekonsha Prodigy P2 # 90885 because of its reliability and ease of use. It's one of our top selling brake controllers. I've attached a video of the... view full answer...
I can definitely help! The correct 7-way harness you need for your 2016 Dodge Grand Caravan is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. With this kit, you will be able to prep your vehicle by splicing the wiring into your current wiring. For assistance with installation, I attached a video that shows the process on a 2014 model Grand Caravan. The process on a 2016 model is nearly identical.
To add a brake controller,... view full answer...
To use the Roadmaster Falcon 2 tow bar # RM-520 with Blue Ox base plates # BX2633 you will need to use adapter # RM-031.
In addition to the base plates, tow bar, and the adapter, you will also need safety cables, lighting, and supplemental braking.
For safety cables, if you do not have some already, I recommend # RM-643. The coiled design helps keep the cables off of the ground.
For lighting the easiest solution is to use a magnetic kit such as # RM-2120. Also, for the 2012-2014 Ford... view full answer...
Electric brakes on a trailer do require a brake controller be installed in the tow vehicle to activate them. Along the most popular and reliable units we offer is the Tekonsha Prodigy P2, part # 90885. This brake controller is easy to set up and operate and offers 3 boost levels, battery protection and continuous diagnostics. It is among the highest-rated controllers used by our customers.
Installation of this unit will require a brake controller installation kit, part # ETBC7 that you... view full answer...
Since you already added a 4-Way trailer connector to your 2010 Dodge Grand Caravan you will just need two additional parts to add a brake controller. First, you will need a 4 and 7 Way installation kit # ETBC7. This provides a 7-Way at the back of the van and the wiring to install a brake controller.
The other part you will need is the brake controller itself. I recommend the Tekonsha P2, # 90885. It is easy to set up and easy to use. I have included a link to the installation details... view full answer...
You're 100% on point with what you need; since your 2017 Dodge Grand Caravan already has the 4-way like # C56331 installed, the only other things you need are the brake controller, wiring adapter, and 7-way, which are indeed the parts you mentioned:
- Universal Installation Kit for Trailer Brake Controller # ETBC7
- Redarc Tow-Pro Liberty Brake Controller # RED24FR
- Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR
The # ETBC7 comes with the 7-way and... view full answer...
To install the Derale Transmission Cooler # D13503 on your 2010 Dodge Grand Caravan you will also need one # D13035 adapter, which is sold separately from the # D13503 kit. This fitting will take the new Derale hose and adapt it to fit into your factory transmission cooler.
We installed this exact transmission cooler on a 2013 Dodge Grand Caravan, which is in the same generation model as your 2010, so the install should be very similar. I have linked the video of this install for you... view full answer...
There is no specific 'best' rise or length of ball mount for a given vehicle. Since the hitch and coupler height of every vehicle and every trailer is different, you'll need to take some measurements.
To determine the rise/drop of ball mount needed, you'd want to measure the distance from the inside top of the hitch receiver tube to the ground. Then with the trailer level, measure the distance from the underside of the trailer coupler to the ground. The difference between the measurements... view full answer...
The replacement L-pins for the 4,000 pound Equal-I-zer Weight Distribution System # EQ37040ET are part # 90-03-9460. The clips for the pins are part # 90-04-9208. view full answer...
In a typical RV-style 7-way the 12V charge circuit is carried on the pin at the 1-o-clock position as you look at the socket from the rear of the vehicle. Please refer to the linked photo. The 12V feed from a vehicle 7-way can deliver just enough trickle-charge current to maintain a strong battery while you're on the road, but it is not the best way to power a trailer jack.
The best way to power a trailer-mounted 12V tongue jack, like the Stromberg Carlson # SC63VR, is to install a dedicated... view full answer...
We may have a solution available for you though we do not have a list of individual parts for specific trailers. However, you will likely find something that works, such as the Global Link RV Entry Door Locking Latch Kit # 295-000019, which is a replacement for a Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch.
I have added a link to pages that have our selection of entry and baggage door locks for you to take a look at. view full answer...
The excellent Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is a popular choice for its reliability, ease of use and its many included features.
Your vehicle does not have the quick-connect port under the dash that allows for fast no-splicing installation. To install this unit in your 2012 Dodge Grand Caravan with factory tow package and 7-Way connector you will need a brake controller install kit to enable a hard-wired installation, part # ETBC7.
This is a complete kit that includes... view full answer...
To tow a trailer you need a hitch receiver, ball mount, and hitch ball to hook up the trailer, as well as a wiring harness to power the trailer's lights.
Hitch receivers are custom fit to vehicles. For your 2018 Dodge Caravan I recommend the etrailer.com hitch, part # E98854. It bolts right onto the van and all the hardware you need is included. It's a 2 inch receiver which has a higher capacity than the smaller 1-1/4 inch receivers. To go along with it I recommend our ball mount kit,... view full answer...
The K-Source Universal Towing Mirrors - Clip On - Flat Mirror - Qty 2 # KS69ZR are confirmed to fit your 2016 Ford F-150 and are affordable.
These extra-large towing mirrors will mount on your factory side mirrors to extend your line of sight. They're adjustable so it will fit mirrors of different shapes and sizes. They have heavy-duty rubber straps that will securely tighten over your mirrors.
The mirrors have a black plastic housing that provides a clean look and won't rust or corrode.... view full answer...
In order to use the electric trailer brakes you are going to need to install a brake controller and 7-Way trailer connector on your 2008 Dodge Grand Caravan.
First, if your van does not already have a 4-Way connector you will need to install one using # 118552. If it does have a 4-Way already you do not need to install another one.
Next you will need the 4 and 7-Way Installation kit # ETBC7. This provides the 7-Way and the wiring and accessories needed to hardwire in the brake controller.... view full answer...
I'd be more than happy to help you get the correct parts needed to tow a trailer with your 2019 Dodge Grand Caravan! Here are the parts I recommend getting:
- etrailer Trailer Hitch Receiver # e98854
- Curt T-Connector Vehicle Wiring Harness # C56331
- Universal Installation Kit # ETBC7
- No-Drill Mount # 18140
- Redarc Tow-Pro Liberty Brake Controller # RED24FR
- Wiring Pigtail # RED69FR
Attached are some installation videos for the wiring as well as a link to our helpful article on... view full answer...
Go To Results